The SR2 has an on-board 12V relay which can be connected to a buzzer or beacon.

•The relay is normally held closed.

•It opens in the event of any alarm on the assigned Grids.

•DIP switch 3 sets which alarms will open the relay.

ON

Network Fail Alarm: The relays will go off in the event of all alarms on the assigned Grids in the software or a network communications failure (no network communications for 60 minutes). When the network communications are restored, the relays will be reset.

OFF

(default)

Normal Operation: The relays will respond to all alarms on the assigned Grids in the software.