Navigation:
Synergy Outputs >> 3rd Party Equipment Control (MS1000)
The Hanwell MS1000 Control System is a physical interface between Synergy and 3rd party control equipment, for example a Building Management System (BMS).
It is designed to generate either latched voltages or currents corresponding to inputs, proportional to measured values, generated by Synergy compatible sensors.
Typical applications could include:
•Interfacing radio sensors to a Building Management System (BMS).
•Conservation heating systems.
•Bespoke heating control.
•Providing signals to an Alarm Panel.
The MS1000 Control System can:
•Allow radio sensors to directly replace wired-in sensors in applications such as building environmental control where the 3rd party BMS can directly accept analogue signals.
•Trigger relay outputs for alarm or control functions (e.g. motorised valves).
•Provide a combination of all output types within a single MS1000 system.
Refer to Document GD4619-1: MS1000 Control System Installation Guide for more information.