Navigation:
System Configuration Admin >> Synergy Remote Management Tool
Overview of the Synergy Remote Management Tool
The Synergy Remote Management Tools are intended primarily for system supervisors and expert users.
They provide an http link to data in the Synergy database, allowing hardware devices, at remote locations, to be configured and associated with an existing Synergy system.
Once a device has been added to Synergy via the Web Interface the Remote Management Tools can be used to perform configuration tasks on that device such as Synchronising, Calibrating and Merging.
•In general, these tools should be used where there is a hardware firewall/internet connection between the Synergy Remote Management Tools and the Synergy Server.
•The use of this tool requires an http: (Port 80) connection to the Synergy Server.
These tools currently provide the capability to perform the following tasks:
•Merging USB Devices
•SR2 Configuration
•SR2 Network Configuration
•Wood Watch Configuration
•AE Device Configuration
•Current Clamp Configuration
Pre-requisites
The Synergy Remote Management Tools must be installed on a Microsoft Windows PC or Server; minimum operating system requirement is Windows 7; either x86 or x64 or Windows Server 2008; either x86 or x64.
•The Host machine must have a DVD player and at least one free USB port.
•There must be HTTP (Port 80) access from the Host machine to the Synergy Server.
The Remote Management Tools are intended to be installed on machines remote to the Synergy Server.
As many instances as required may be installed without further licensing implications.
The Remote Management Tools are installed from the main Synergy Installer dialog as follows:
1.Run Install.exe from the DVD.
2.Select Install Synergy Remote Management Tools.
3.Deselect Install Synergy Server Components.
4.Select Next.
5.Follow the on screen instructions.